Juniper EX9200

SIB #2
Plane enabled
FPC #5
PFE #1
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
FPC #7
PFE #1
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
show chassis fabric fpcs (T640 Router)
user@host> show chassis fabric fpcs
Fabric management FPC state:
FPC #2
PFE #1
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
SIB #3
Plane enabled
SIB #4
Plane enabled
FPC #3
PFE #1
SIB #2
Plane enabled
SIB #3
Link error
Destination error on PFEs 0 1 2 3 4 5 6 7
8 9 10 11 12 13 14 15 16 17 18 19 20 21
SIB #4
Destination error on PFEs 0 1 2 3 4 5 6 7
8 9 10 11 12 13 14 15 16 17 18 19 20 21
...
show chassis fabric fpcs (TX Matrix Router)
user@host> show chassis fabric fpcs
lcc0-re0:
--------------------------------------------------------------------------
Fabric management FPC state:
FPC #0
PFE #1
SIB #0
Links ok
SIB #2
Links ok
139Copyright © 2016, Juniper Networks, Inc.
Chapter 13: Operational Commands: Packet Forwarding Engine Components