Juniper EX9200

lcc2-re0:
--------------------------------------------------------------------------
lcc4-re0:
--------------------------------------------------------------------------
Fabric management FPC state:
FPC #2
PFE #0
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
PFE #1
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
FPC #3
PFE #0
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
PFE #1
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
lcc6-re0:
--------------------------------------------------------------------------
show chassis fabric fpcs lcc (TX Matrix Router with 3D SIBs)
user@host> show chassis fabric fpcs lcc 4
lcc4-re0:
--------------------------------------------------------------------------
143Copyright © 2016, Juniper Networks, Inc.
Chapter 13: Operational Commands: Packet Forwarding Engine Components