Juniper EX9200

Syntax (ACX Series
Universal Access
Routers)
show chassis fpc
<detail <fpc-slot>> | <pic-status <fpc-slot>>
<fpc-slot>
Syntax (ACX500
Routers)
show chassis fpc
<fpc-slot>
detail <fpc-slot>
pic-status <fpc-slot>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 11.1 for QFX Series.
Command introduced in Junos OS Release 12.1x48 for PTX Series Packet Transport
Routers.
Command introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
Command introduced in Junos OS Release 13.2 for MX104 3D Universal Edge Routers.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Command introduced in Junos OS Release 15.1 for MX104-40G 3D Universal Edge Routers.
Description Display status information about the installed Flexible PIC Concentrators (FPCs)and
PICs.
Options none—Display status information for all FPCs. On a TX Matrix router, display status
information for all FPCs on the attached T640 routers in the routing matrix. On a TX
Matrix Plus router, display status information for all FPCs on the attached routers in
the routing matrix.
Copyright © 2016, Juniper Networks, Inc.160
Port Mirroring Feature Guide for EX9200 Switches