EasyManua.ls Logo

Juniper EX9200

Juniper EX9200
448 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 9: show chassis hardware Output Fields (continued)
Level of OutputField DescriptionField Name
extensive(extensive keyword only) Identification number that describes the FRU hardware.Assb ID or
Assembly ID
extensive(extensive keyword only) Version number of the FRU hardware.Assembly Version
extensive(extensive keyword only) Flags.Assembly Flags
none specified(clei-models, extensive, and models keyword only) Model number of the FRU
hardware component.
FRU model number
none specified(clei-models and extensive keyword only) Common Language Equipment
Identifier code. This value is displayed only for hardware components that use
ID EEPROM format v2. This value is not displayed for components that use ID
EEPROM format v1.
CLEI code
extensiveID EEPROM version used by the hardware component: 0x00 (version 0), 0x01
(version 1), or 0x02 (version 2).
EEPROM Version
All levelsBrief description of the hardware item:Description
Type of power supply.
Type of PIC. If the PIC type is not supported on the current software release,
the output states Hardware Not Supported.
Type of FPC: FPC Type 1, FPC Type 2, FPC Type 3, FPC Type 4 , or FPC
TypeOC192.
On EX Series switches, a brief description of the FPC.
The following list shows the PIM abbreviation in the output and the
corresponding PIM name.
2x FE—Either two built-in Fast Ethernet interfaces (fixed PIM) or dual-port
Fast Ethernet PIM
4x FE—4-port Fast Ethernet ePIM
1x GE Copper—Copper Gigabit Ethernet ePIM (one 10-Mbps, 100-Mbps, or
1000-Mbps port)
1x GE SFP—SFP Gigabit Ethernet ePIM (one fiber port)
2x Serial—Dual-port serial PIM
2x T1—Dual-port T1 PIM
2x E1—Dual-port E1 PIM
2x CT1E1—Dual-port channelized T1/E1 PIM
1x T3T3 PIM (one port)
1x E3—E3 PIM (one port)
4x BRI S/T—4-port ISDN BRI S/T PIM
4x BRI U—4-port ISDN BRI U PIM
1x ADSL Annex A—ADSL 2/2+ Annex A PIM (one port, for POTS)
1x ADSL Annex B—ADSL 2/2+ Annex B PIM (one port, for ISDN)
2x SHDSL (ATM)—G SHDSL PIM (2-port two-wire module or 1-port four-wire
module)
Copyright © 2016, Juniper Networks, Inc.210
Port Mirroring Feature Guide for EX9200 Switches

Table of Contents

Other manuals for Juniper EX9200

Related product manuals