first binding in the stanza (or the only binding) is used at the logical interface. This is
done mainly for backward compatibility.
•
Layer 2 port-mirroring firewall filters do not support the use of next-hop subgroups for
load-balancing mirrored traffic.
Related
Documentation
• Understanding Layer 2 Port Mirroring on page 3
• Application of Layer 2 Port Mirroring Types
• Precedence of Multiple Levels of Layer 2 Port Mirroring on a Physical Interface on
page 29
• Understanding Layer 2 Port Mirroring of PE Router Logical Interfaces on page 41
• Understanding Layer 2 Port Mirroring of PE Router Aggregated Ethernet Interfaces
Copyright © 2016, Juniper Networks, Inc.18
Port Mirroring Feature Guide for EX9200 Switches
To Next Page
Loading...
