Juniper EX9200 - Page 43

maximum-packet-length number; # Default is 0.
rate number;
run-length number;
}
family (ccc | vpls) { # Address- type ’ethernet-switching’ displays as ’vpls’.
output { # Mirror destination properties
interface interface-name;
no-filter-check; # Optional. Allow filters on interface.
}
}
}
}
mirror-once; # Optional. Mirror destinations do not receive duplicate packets.
}
}
Related
Documentation
• Understanding Layer 2 Port Mirroring on page 3
• Layer 2 Port Mirroring Named Instances
• Binding Layer 2 Port Mirroring to Ports Grouped at the FPC Level on page 30
• Binding Layer 2 Port Mirroring to Ports Grouped at the PIC Level on page 32
• Examples: Layer 2 Port Mirroring at Multiple Levels of the Chassis on page 34
• Example: Layer 2 Port Mirroring with Multiple Instances
27Copyright © 2016, Juniper Networks, Inc.
Chapter 5: Port Mirroring Instances