Power
Requirement
650 W maximum
NOTE:
• In the SRX5600 and SRX5800 Firewalls, you must have high-capacity power supplies
(either AC or DC) and high-capacity fan trays installed in the rewall in order to install
and use SRX5K-SPC3 SPCs. If you do not have high-capacity power supplies and fan
trays installed, the rewall will log an alarm condion when it recognizes the SRX5K-
SPC3 SPCs.
• On SRX5600 Firewalls with AC power supplies, we recommend that you use high-line
(220v) input power to ensure the device has adequate power to support SRX5K-SPC3
SPCs.
Weight Approximately 18 lb (8.3 kg)
22
To Next Page
Loading...
