Juniper SRX5400 - Page 86

• Control eld-programmable gate array (FPGA) to provide the Peripheral Component Interconnect
(PCI) interface to the Roung Engine
• Circuits for chassis management and control
• Power circuits for the Roung Engine and SCB3
• LEDs to provides status of the SCB3
Descripon SCB3 with slot for Roung Engine
Soware release Junos OS Release 15.1X49-D10 and later
Cables and connectors Slot for Roung Engine
Controls None
Supported slots
• SRX5400–Only boom slots 0 and 1/0
• SRX5600–Only boom slots 0 and 1
• SRX5800–Only center slots 0, 1, and 2/6
Power requirement 300 W
Weight 9.6 lb (4.4 kg) with Roung Engine
82