Juniper SRX5400 - Page 67

•
Line-rate throughput of up to 240 Gbps
•
Supports up to 32,000 queues per-slot
•
LAN-PHY mode at 10.3125 Gbps on a per-port basis
The ports are labeled as:
•
10-Gigabit Ethernet ports: 0/0, 0/1, 2/0, and 2/1
•
100-Gigabit Ethernet ports: 1/0 and 3/0
Hardware features
•
Configurable LAN-PHY mode options per 10-Gigabit Ethernet port
•
Optical diagnostics and related alarms
•
Intelligent oversubscription services
Software features
OK/FAIL LED, one bicolor:
•
Solid green—MPC is functioning normally.
•
Blinking green—MPC is transitioning online or offline.
•
Red—MPC has failed.
10-Gigabit Ethernet LINK LED, one bicolor per port:
•
Green—Link is up.
•
Amber—Link is disabled.
•
Off—Link is down or disabled.
100-Gigabit Ethernet LINK LED, one bicolor per port:
•
Green—Link is up.
•
Amber—Link is disabled.
•
Off—Link is down.
LEDs
59