Juniper SSG 140 - Hostname and Domain Name; Domain Name System Server

SSG 140 Series Hardware Installation and Configuration Guide
34  Basic Device Configuration
CLI
set interface ethernet0/0 manage web
unset interface ethernet0/0 manage snmp
save
Hostname and Domain Name
The domain name defines the network or subnetwork that the device belongs to,
while the hostname refers to a specific device. The hostname and domain name
together uniquely identify the device in the network.
To configure the hostname and domain name on a device, use the WebUI or CLI as
follows:
WebUI
Network > DNS > Host: Enter the following, then click Apply:
Host Name: name
Domain Name: name
CLI
set hostname name
set domain name
save
Domain Name System Server
The Domain Name System (DNS) server on the network maintains a database for
resolving hostnames and IP addresses. The SSG 140 device accesses the configured
DNS servers to resolve hostnames. In ScreenOS, you configure the IP addresses for
the primary and secondary DNS servers and the time of the day at which the device
performs a DNS refresh.
WebUI
Network > DNS > Host: Enter the following, then click Apply:
Primary DNS Server: ip_addr
Secondary DNS Server: ip_addr
DNS Refresh: (select)
Every Day at: time
CLI
set dns host name ip_addr
set dns host name ip_addr
set dns host schedule time
save