SSG 140 Series Hardware Installation and Configuration Guide
32 Basic Device Configuration
Basic Device Configuration
This section describes the basic configurations that you need to perform to allow
the SSG 140 device to connect LAN users to a remote network. For more detailed
information about ScreenOS features and how to configure them, see the Concepts
& Examples ScreenOS Reference Guide.
This section describes the following basic configuration settings:
Root Admin Name and Password
Date and Time
Administrative Access
Management Services
Hostname and Domain Name
Domain Name System Server
Default Route
Ethernet0/0 Interface IP Address
Root Admin Name and Password
The root admin user has complete privileges for configuring an SSG 140 device. We
recommend that you change the default root admin name and password (both
netscreen) immediately.
To change the root admin name and password, use the WebUI or CLI as follows:
WebUI
Configuration > Admin > Administrators > Edit (for the
netscreen
administrator name value): Enter the following, then click OK:
Administrator Name:
Old Password: netscreen
New Password:
Confirm New Password:
CLI
set admin name name
set admin password pswd_str
save
NOTE:
Passwords are not displayed in the WebUI.
To Next Page
Loading...