SSG 140 Series Hardware Installation and Configuration Guide
58
Table 12: Field Descriptions for Ethernet0/0 Interface
5. Other Interface IP Address Window
Use this screen to configure an IP address and a netmask for the Trust and DMZ
interfaces.
Figure 21: Other Interface IP address Window
Field Description
Dynamic IP via DHCP Enables the device to receive an IP address for the Untrust zone
interface from an ISP.
Dynamic IP via PPPoE Enables the device to act as a PPPoE client, receiving an IP address
for the Untrust zone interface from an ISP. Enter the username and
password assigned by the ISP.
Static IP Assigns a unique and fixed IP address to the Untrust zone interface.
Enter the Untrust zone interface IP, Netmask, and gateway.
To Next Page
Loading...