55
Appendix B
Initial Configuration Wizard
This appendix provides detailed information about the Initial Configuration Wizard
(ICW) for an SSG 140 device.
After you have physically connected your device to the network, you can use the
ICW to configure the interfaces that are installed on your device.
This section describes the following ICW windows:
1. Rapid Deployment Window on page 56
2. Administrator Login Window on page 56
3. Physical Ethernet Interface Window on page 57
4. Untrust Zone Window on page 57
5. Other Interface IP Address Window on page 58
6. Physical Ethernet DHCP Interface Window on page 59
7. Confirmation Window on page 60
To Next Page
Loading...