Juniper SSG 140 - Physical, Electrical, and Environmental Specifications; Certifications and Standards

SSG 140 Series Hardware Installation and Configuration Guide
52  SSG 140 Physical Specifications
SSG 140 Physical Specifications
Table 8: SSG 140 Physical Specifications
Electrical Specifications
Table 9: SSG 140 AC Electrical Specifications
Environmental Tolerance
Table 10: SSG 140 Environmental Tolerance
Certifications
Safety
 CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1 Safety of Information Technology
Equipment
 EN 60950-1 Safety of Information Technology Equipment
 EN 60825-1 Safety of Laser Products - Part 1
Description Value
Chassis
dimensions
1.75 inches (4.4 cm) high
17.5 inches (44.4 cm) wide—18.9 in. (48 cm) wide with mounting brackets
attached
15 inches (38.1 cm) deep—plus 0.5 in. (1.27 cm) of hardware that protrudes
from the chassis front
Device weight Minimum configuration (no PIMs): 10.2 lbs (4.6 kg)
Maximum configuration (four PIMs): 11.7 lbs (5.3 kg)
Item Specification
AC input voltage Operating range: 90 to 264 VAC
AC input line frequency 50 or 60 Hz
AC device current rating 1.8A
Description Value
Altitude No performance degradation to 6560 ft (2000 m)
Relative humidity Normal operation ensured in relative humidity range of 5% to 90%,
noncondensing
Temperature Normal operation ensured in temperature range of 32°F (0°C) to 104°F
(40°C)
Non-operating storage temperature in shipping carton: -40°F (-40°C) to
158°F (70°C)
Maximum thermal
output
580 BTU/hour (170 W)