5
About This Guide
The Juniper Networks Secure Services Gateway (SSG) 140 device is an integrated
router and firewall platform that provides Internet Protocol Security (IPSec) virtual
private network (VPN) and firewall services for small- and medium-sized
companies and enterprise branch and remote offices.
The SSG 140 supports support universal serial bus (USB) storage and four physical
interface modules (PIM) slots that can hold T1, E1, ISDN, and Serial wide area
network (WAN) PIMs. The SSG 140 also provides protocol conversions between
local area networks (LANs) and WANs.
NOTE: The configuration instructions and examples in this document are based on the
functionality of a device running ScreenOS 5.4. Your device might function
differently depending on the ScreenOS version you are running. For the latest
device documentation, refer to the Juniper Networks Technical Publications
website at http://www.juniper.net/techpubs/hardware
. To see which ScreenOS
versions are currently available for your device, refer to the Juniper Networks
Support website at http://www.juniper.net/customers/support/
.
To Next Page
Loading...