SSG 140 Series Hardware Installation and Configuration Guide
56
1. Rapid Deployment Window
Figure 17: Rapid Deployment Window
If your network uses NetScreen-Security Manager, you can use a Rapid Deployment
configlet to automatically configure the device. Obtain a configlet from your
Security Manager administrator, select the Yes option, select the Load Configlet
from: option, browse to the file location, then click Next. The configlet sets up the
device for you.
If you want to bypass the configuration wizard and go directly to the WebUI, select
the last option, then click Next.
If you are not using a configlet to configure the device and want to use the
configuration wizard, select the first option, then click Next. The ICW welcome
screen appears. Click Next. The Administrator Login Window appears.
2. Administrator Login Window
Enter a new administrator login name and password, then Click Next.
Figure 18: Admin Login Window
To Next Page
Loading...