To Next PageTo Next PageHow to fix a JVC Camcorder when the power does not turn on?
If your JVC Camcorder power does not turn on, check if the AC adapter is properly connected and if the battery is charged. Also, if you've just turned it off, wait at least 5 seconds before trying to turn it on again.
Why are the images on my JVC JY-HM360E Camcorder LCD monitor and viewfinder screen dark or blurred?
If the images on your JVC Camcorder's LCD monitor and viewfinder screen appear dark or blurred, try the following: Readjust the brightness of the LCD monitor and viewfinder. Check if the iris is closed or the shutter speed setting is too high. Adjust the contour for the LCD monitor and the viewfinder screen using the [PEAKING +/-] button if the amount of peaking is too little.
Why is there no camera image on my JVC JY-HM360E LCD monitor and viewfinder screen?
If the camera image is not output on the LCD monitor and viewfinder screen of your JVC Camcorder, ensure that the camera recorder is set to the Camera mode. Use the [MODE] selection button to switch to the Camera mode.
Why is there an incorrect display on the viewfinder of my JVC Camcorder?
If there is an incorrect display on the viewfinder of your JVC Camcorder, check if the LCD monitor is used with [LCD/VF] B [LCD + VF] set to “Off”?
What to do if my JVC Camcorder is unable to start recording?
If your JVC Camcorder won't start recording, check the following: Ensure the record trigger button/lock switch on the handle is turned on. Verify that the write-protect switch of the SD card is turned off. Confirm that the camera recorder is set to Camera mode using the [MODE] selection button, and that the SD card is compatible with the recording format.
What to do if my JVC JY-HM360E Camcorder SD card cannot be initialized (formatted)?
If your JVC Camcorder SD card cannot be initialized (formatted), check if the write-protect switch of the SD card is turned on. If it is, make sure to turn it off.
Why does the battery alarm appear on my JVC JY-HM360E even with a charged battery?
If the battery alarm appears on your JVC Camcorder even after loading a charged battery, the battery might be too old.
What to do if playback doesn't start on my JVC Camcorder after selecting a clip?
If playback doesn't start on your JVC Camcorder after selecting a clip thumbnail and pressing the Set button (R), the selected clip might not be playable. Playback is not possible if the clip has a different video format setting.
Why is the actual recording time shorter than estimated on my JVC Camcorder?
The recordable time on your JVC Camcorder may be shorter than the estimated time depending on the shooting conditions or the subject.
How to display the time code and user’s bit on my JVC JY-HM360E Camcorder?
If the time code and user’s bit are not displayed on your JVC Camcorder, check if [LCD/VF] B [Display Settings] B [TC/UB] is set to “Off”. To display the time code or user’s bit, set it to “TC” or “UB.”
General| Video Resolution | 1920 x 1080 |
|---|---|
| HDMI Output | Yes |
| USB | USB 2.0 |
| Digital Zoom | Up to 200x |
| Focus System | Auto / Manual |
| Exposure Control | Auto/Manual |
| White Balance | Auto/Manual |
| Image Format | JPEG |
| Microphone | Built-in stereo microphone |
| USB Interface | USB 2.0 |
| Type | Camcorder |
| Recording Format | AVCHD |
| Audio Input | 2 x XLR inputs |
| Image Sensor | CMOS |
| Focal Length (35mm equivalent) | 29.5 mm |
| Aperture | f/2.8 - f/4.5 |
| ND Filter | Yes (OFF, 1/4, 1/16, 1/64) |
| Audio Recording | Stereo |
| Audio Output | 3.5mm stereo mini-jack |
| Display | 3.5" LCD |
| Storage Media | SD/SDHC/SDXC card |
| SDI Output | Yes |
| LCD Screen | 3.5-inch |
| Recording Media | SD/SDHC/SDXC Memory Card |
| Video Format | AVCHD |
| Speaker | Yes |
| Weight (without battery and memory card) | Approx. 280g |
