Using the Focus/Zoom Ring
1
Set the [FOCUS/ZOOM] operation
switch to
“ZOOM”.
You can adjust the preferred angle of view by
turning the focus/zoom ring.
Saving/Recalling Current Zoom
Position (Preset Zoom)
This allows you to register up to three zoom
positions.
1
Assign the “Preset Zoom1”, “Preset
Zoom2”,
or
“Preset Zoom3” function to any
of the user buttons.
(A P
34 [Assignment of Functions to User
Buttons] )
(
A P90 [USER1 to USER7, LCD KEY▲, LCD
KEY▶, LCD KEY▼, LCD KEY◀] )
2
Save the current zoom position.
0
Press any of the buttons assigned with the
“Preset Zoom1”, “Preset Zoom2
”, or “Preset
Zoom3” function for more than 1 second.
0
The current zoom position will be stored.
3
Recall the stored zoom position.
0
Press any of the buttons assigned with the
“Preset Zoom1”, “Preset Zoom2
”, or “Preset
Zoom3” function and release within 1
second.
0
The camera recorder zooms to the stored
zoom position.
Memo :
0
The speed
to zoom to the zoom position can be
set in [Main Menu] B [Camera Function] B [User
Switch Set] B [Preset Zoom Speed].
(A P91
[ Preset Zoom Speed ] )
0
Operating other zoom maneuvers during a
zoom position recall will cancel the recall.
Focus Operation
.
TIME CODE
FOCUS
MANU
LOCK
FOCUS ASSIST/1
TIME CODE
AUTO
AUTO
ZOOMFOCUS
Adjusting Focus Automatically
Set the [FOCUS AUTO / MANU / BAUTO] focus
switch to “AUTO”.
There is no icon display in Auto Focus mode.
Memo :
0
If [Main Menu] B [Camera Function] B [AF
Assist] is
set to “Area” or “Far/Near”, you can turn
the focus/zoom ring to shift the auto focus point
while in the automatic focus adjustment mode.
(A P90
[ AF Assist ] )
0
When face
detection is enabled, the Auto Focus
icon e appears with the face mark.
(A P98 [ Focus ] )
One Push Auto Focus
While in the Manual Focus mode, pressing the
[FOCUS AUTO
/ MANU / BAUTO] focus switch to
“BAUTO” (within 1 minute) makes the camera
recorder focus on the center of the frame
automatically.
Memo :
0
Face detection does not work during One Push
Auto Focus.
0
AF Assist does not function.
0
When the operation is complete, the camera
recorder returns to the Manual Focus mode
automatically.
0
One Push Auto Focus functions with emphasis
on the focusing speed. This function is not
suitable during recording.
44
Zoom Operation
Shooting
To Next Page
Loading...
