Status Screen
0
This screen allows you to check the current
settings.
0
To display the status screen, press the
[STATUS]
button in the normal screen.
0
The status display differs according to the
operation mode (two types).
(A P14 [Operation Modes] )
0
Press the [STATUS] button to switch to the
display screen.
0
Press the
[MENU/THUMB] button at each status
screen (other than the [Camera 1]/[Camera 2]
screen) to enter the setting screen.
0
Use the cross-shaped button (HI) to switch
screens as follows:
.
* These are screen examples. The contents
displayed are different depending on the
settings.
USB Mode Screen
This screen displays the USB mode.
.
Warning Display
Warning display is displayed in the display screen
(Camera mode, Media mode).
(A P127 [Error Messages and Actions] )
.
P13000K
1/100
F1. 6
0
dB
AE+6
5 . 6 f t
12 :34 :56
Jan 12, 2016
00:00: 00.00
4030 20
10
0
Warning Display Area
Displays on the LCD Monitor and Viewfinder
31
Preparations
To Next Page
