JVC JY-HM360E - Adjusting the Camera Image

White Paint Adjustment
You can fine-tune the white balance saved in
Memory A or Memory B.
1
Select [Main Menu] B [
Camera Process
] B
[White Balance] B [AWB Paint] and press
the Set button (R).
The White Paint Adjustment screen appears.
.
1
2
Adjust the R and B values.
Use the cross-shaped button (JK) to adjust R
value and (HI) to adjust B value.
.
3
Press the Set button (R).
Returns to the [White Balance] screen.
.
B Value
R Value
Memo :
0
Selecting [y] will
usually clear the White Paint
Adjustment value. But when [Main Menu] B
[Camera Process] B [White Balance] B [Clear
Paint After AWB] is set to “Off”, values will not
be cleared even when [y] is selected.
(A P94 [ Clear Paint After AWB ] )
0
If [White
Balance
] has been assigned to the user
button, pressing the assigned user button will
display the AWB Paint Adjustment screen.
(A P34 [Assignment of Functions to User
Buttons] )
Adjusting the Camera
Image
The picture quality of the camera can be set using
the [Camera Process]
menu.
As the adjustments are shown on the screen, you
can adjust the values while checking the picture
quality on the camera.
0
[Detail]
0
[Master Black
]
0
[Black Toe]
0
[White Clip]
0
[Gamma]
0
[White Balance]
0
[Color Matrix]
0
[Color Gain
]
Memo :
0
For details of the respective items, see the
[Camera Process]
menu.
(A P92 [Camera Process Menu] )
0
During Scene Select mode, use the Scene
Select setting menu to set the picture quality.
56
Adjusting the White Balance
Shooting