Adjusting the Brightness
Adjust the brightness using Iris, Gain and Shutter
speed according to the brightness of the object.
Adjusting the Brightness Automatically
When the [FULL AUTO ON/OFF] switch is set to
“ON”, Iris, Gain, Shutter speed and ND filter are
automatically
adjusted
according to the brightness
of the object to maintain optimum brightness.
.
FIX VAR OFF
AE LEVEL
LOCK
IRIS
∞
TIME CODE
FULL AUTO
ON
OFF
AE LEVEL
MENU/THUMB
GAIN
CANCEL
WHT BAL SHUTTER
AE LOCK/4
Memo :
0
You can use the cross-shaped button (HI) on
the side
of the camera recorder to set the target
level (brighter/darker) to maintain optimum
brightness during automatic adjustment.
(A P89 [ AE Level ] )
0
The convergence speed of the automatic
adjustment for gain, shutter and iris can be set
in the menu.
(A P89 [ AE Speed ] )
0
If one or more of the items (Gain, Iris and
Shutter) have been set to “Auto”, the value of the
corresponding items when the user button that
is assigned “AE Lock” is pressed can be fixed.
(A P
91 [ AE Lock ] )
Adjusting the Brightness Manually
When the [FULL AUTO ON/OFF] switch is set to
“OFF”
and [SCENE SELECT] switch is set to
“OFF”, some or all of the items (Iris, Gain and
Shutter Speed) can be manually adjusted.
(A P50 [Adjusting the Iris] )
(A P51 [Setting the Gain] )
(A P52 [Setting the Electronic Shutter] )
Memo :
0
If Iris, Gain and Shutter Speed are manually
adjusted, the [AE Level
] setting is temporarily
disabled.
0
Settings for [AE Level] are disabled during the
Scene Select mode.
Adjusting the Iris
You can
adjust the aperture of the lens iris manually
or automatically according to the brightness of the
object.
.
TIME CODE
IRIS
PUSH AUTO
FULL AUTO
ON
OFF
Auto Iris (Automatic Adjustment) Mode
1
Set the [FULL AUTO ON/OFF] switch to
“OFF” to turn off the Full Auto mode.
2
Set
the [SCENE SELECT
] switch to “OFF” to
turn off the Scene Select mode.
3
Press the [IRIS] button to set to the Auto Iris
mode.
The iris is automatically adjusted according to
the brightness of the object.
The lens aperture value (F-number) is not
displayed in the Auto Iris mode.
Memo :
0
Setting the [FULL AUTO ON/OFF]
switch to
“ON” to enter Full Auto mode also activates the
Auto Iris mode. In this case, the Gain, Shutter
and White Balance also enter into Auto mode
forcibly.
The switching operation of the [IRIS] switch is
disabled in the Full Auto mode.
0
You can use the cross-shaped button (HI) on
the side control panel to set the target level
(brighter/darker) of the auto iris.
(A P89
[ AE Level ] )
0
The convergence speed of the auto iris can be
set in the menu.
(A P89 [ AE Speed ] )
Manual Iris (Manual Adjustment) Mode
The aperture value (F-number) of the lens can be
set manually.
1
Set the [FULL AUTO ON/OFF] switch to
“OFF”
to turn off the Full Auto mode.
2
Set the [SCENE SELECT
] switch to “OFF” to
turn off the Scene Select mode.
3
Press the [IRIS] button to set to the Manual
Iris mode.
The lens aperture value (F-number) is
displayed.
50
Adjusting the Brightness
Shooting
To Next Page
Loading...
