JVC JY-HM360E - Page 49

List of Shooting Modes (Icon)
Icon Description
.
Indoor (*1)
Select for indoor shooting.
.
Outdoor (*1)
Select for outdoor shooting.
.
(Reset)
Returns all current setting values
for the [SCENE SELECT] switch
(“A” or “B”) to default.
.
Hi Contrast
Select to add contrast and
differentiate brightness and
darkness.
.
Bright (*2)
Select when the background is
bright and the subject appears
dark against
the backlight. Adjust
when the subject becomes darker
than necessary in Auto Iris mode.
.
Dark (*2)
Select when the background is
dark and
the subject is too bright.
Adjust when the subject becomes
brighter than necessary in Auto
Iris mode.
.
Vivid
Select for shooting vivid and
colorful subjects.
.
Sharp
Select to emphasize the contour
of the subject.
.
(Adjust)
Displays the adjustment screen.
Details
for
each setting value can
be configured.
(A P49 [Detailed Settings for
Shooting Mode] )
.
(Menu)
Displays the menu screen.
(A P85 [Basic Operations in
Menu Screen] )
*1 “Indoor” and “Outdoor” cannot be selected at
the same time.
*2 “Bright
” and “Dark” cannot be selected at the
same time.
Detailed Settings for Shooting Mode
.
1
Adjust the setting values.
A
Select the item to adjust.
Select the item to adjust using the cross-
shaped button (JK), and press the Set
button (R).
B
Select the setting value.
Change the setting value using the cross-
shaped button (JK), and press the Set
button (R).
The settable items and their values are as
follows.
Contrast
:
-3 to +3 (Default value: +2)
Brightness : 0 to 6 (Default value: 3)
Darkness : 0 to 6 (Default value: 3)
Vividness : -5 to +5 (Default value: +3)
Sharpness : -3 to +3 (Default value: +2)
Memo :
0
The default
value is the one with the check mark
beside the icon in the Scene Select setting
menu.
0
For items without a check mark beside the icons
in the Scene Select setting menu, the setting
values are fixed at “0” and cannot be changed.
2
Press the crossed-shaped button (H) or
[CANCEL] button.
0
Returns to the Scene Select setting menu.
0
Press the
[MENU/THUMB] button to return to
the normal screen.
Memo :
0
When the Adjust screen is displayed, changing
the [SCENE
SELECT]
switch to “OFF” will close
the Adjust screen and return to the normal
screen.
Using Scene Select
49
Shooting