JVC JY-HM360E - Using Scene Select

Using Scene Select
Changing Scene Select
Use the [SCENE SELECT] switch to change
camera settings easily and promptly according to
specific scenarios.
Set the [SCENE SELECT] switch to “A” or “B” to
enter the Scene Select mode. This allows the
camera recorder to enter a preset shooting mode.
.
SCENE SELECT
B
A
OFF
When the camera recorder is in the Scene Select
mode, “SCN A
” or “SCN B” appears on the screen.
.
1/100
F1. 6
0
dB
AE+6
12 :34 :56
Jan 12, 2016
00: 00:00.00
4030 20 10 0
5 . 6 f t
P13000K
Setting Scene Select
You can set different shooting modes for “A” and
“B” of the [SCENE SELECT] switch.
1
Set the [SCENE SELECT] switch to “A” or
“B”.
The camera recorder switches to the desired
set position (“A”
or “B
”).
2
Press the [MENU/THUMB] button.
The Scene Select setting menu appears.
.
Cursor
(Orange Frame)
Check Mark
3
Select a shooting mode.
0
Use the cross-shaped button (JKH I) to
move the
orange cursor. Select icons for the
shooting mode and press the Set button (R).
0
Icons being
selected are indicated by a check
mark (P). Press the Set button again to
remove the check mark.
0
When
a
check mark appears beside an icon,
select i (Adjust) and press the Set button to
display the Adjust screen. You can adjust the
selected shooting mode.
(A P49 [Detailed Settings for Shooting
Mode] )
4
Press the [MENU/THUMB] button.
Returns to the normal screen.
Memo :
0
The
Scene
Select mode operates regardless of
the [FULL AUTO ON/OFF] switch setting.
However, Full Auto mode will be “ON”.
0
The status of the selected shooting mode can
be saved in both
“A” and “B” of the [SCENE
SELECT
] switch.
0
If a check mark does not appear for “Bright
”,
“Dark”, “Hi Contrast”, “Vivid” or “Sharp”, the
Adjust screen will not appear.
0
When the Scene Select setting menu is
displayed, changing the [SCENE SELECT
]
switch to “OFF
” will close the Scene Select
setting menu and return to the normal screen.
0
When
the
[SCENE SELECT] switch is set to “A”
or “B”, items in [Main Menu] B [Camera
Function] cannot be set.
0
Settings for [AE Level
] are disabled during the
Scene Select mode.
0
Settings for [Camera Process
] are disabled
during the Scene Select mode.
48
Using Scene Select
Shooting