1
Assign the “Face Detect
” function to any of
the user buttons.
(A P34 [Assignment of Functions to User
Buttons] )
2
Focus
the camera recorder on a person and
press the
user button that is assigned with
“Face Detect”.
0
When Face detection is enabled, the face
detection icon (q) appears.
0
When [Main Menu] B [Camera Function]
B
[User Switch Set] B [Face Detect] is set
to “AF”, “q e” appears.
0
When [
Main Menu
] B [Camera Function]
B [User Switch Set] B [Face Detect] is set
to “AF&AE”, “q” appears on the left of the
AE level setting value. When the camera
recorder is in the Scene Select mode,
“q AE” appears.
0
If
you
select the person nearest to the center
of the screen, an orange frame will appear on
his face.
0
Focus will be automatically adjusted for the
selected person.
.
Detection Frame (Orange)
AE
AE
Memo :
0
If the detection frame does not appear, make
sure that
the [FOCUS AUTO / MANU / BAUTO]
focus switch is set to “AUTO”. Also, if [Face
Detect] is set to “AF&AE”, set at least one of the
iris, gain, and electronic shutter control items to
the automatic adjustment mode.
(A P
50 [Adjusting the Brightness
Automatically] )
(
A P50 [Auto Iris (Automatic Adjustment)
Mode] )
(A P51 [Automatic Gain Mode (Automatic
Gain Adjustment)] )
(A P52 [Automatic Shutter Mode (Automatic
Shutter Adjustment)] )
Selecting Specific Person from Several
Persons
1
Hold down the user button that is assigned
with
“Face Detect
”.
0
The camera
recorder will enter face selection
mode and the face detection icon (q) will
blink.
0
An orange frame will appear on the face of
the person nearest to the center of the
screen. Blue frames will appear on the faces
of others.
.
Detection Frame (Blue)
Detection Frame (Orange)
Blinking
2
Select a specific person.
0
Use the cross-shaped button (HIJK) to
select a person.
0
An orange frame will appear on the face of
the selected person and focus will be
automatically adjusted.
.
Detection Frame (Blue)
Detection Frame (Orange)
3
Press the Set button (R) to confirm the
person for face detection.
Memo :
0
Press the [CANCEL] button to cancel the
selection.
0
You
can
specify the detection sensitivity and the
operation speed after losing sight of the face
using [Main Menu] B [Camera Function] B
[User Switch Set] B [Face Detect] B [Sensitivity]
and [Hysteresis].
(A P91
[ Sensitivity ] )
(
A P91 [ Hysteresis ] )
Adjusting the Focusing by Face Detection
47
Shooting
To Next Page
Loading...
