JVC JY-HM360E - Camera Function Menu

Camera Function Menu
Menu screen for specifying operation settings
during shooting.
This item can only be selected in the Camera
mode.
Bars
For setting whether to output color bars.
[Setting Values: On, ROff]
Memo :
0
The audio test signals (1 kHz) can be output
simultaneously with the color bar output.
(A P102 [ Test Tone ] )
OIS
For setting whether to enable image stabilizer.
When “On
” is selected, set the Level.
[Setting Values: On,
ROff]
9
Level
For setting the level of the image stabilizer.
[Setting Values: High, RNormal]
Memo :
0
When “High” is selected, correcting severe
camera shake may cause the area surrounding
the image to darken.
0
When “High” is selected, the angle of view
becomes narrower at the wide angle end.
Flicker Correction
For setting whether to adjust image flicker that
occurs under a fluorescent light.
[Setting Values: On, ROff]
Shutter
For specifying shutter-related settings.
Use this item to set to “Step” (fixed value) or
“Variable
” when operating with the cross-shaped
button (JK) on the right side.
0
Variable:
Sets to variable scan. Use this setting such as
when shooting a PC monitor.
0
Step:
Sets to step shutter, which switches the shutter
speed by a fixed value.
[Setting Values: Variable, RStep]
AE Level
For setting the convergence level during AE (Auto
Exposure).
This can also be adjusted using the cross-shaped
button (HI) on the right side.
[Setting Values: -6 to +6 (R0)]
AE Speed
For setting
the convergence speed during AE (Auto
Exposure).
[Setting Values: RFast, Middle, Slow]
AGC Limit
For setting the maximum gain value of “AGC”,
which electrically boosts the sensitivity level
according to the brightness automatically.
[Setting Values:
R24dB, 18dB]
Smooth Trans
For setting the shock reduction function, which
slows down the sudden change when switching
with the [GAIN] or [WHT BAL] selection switch.
[Setting Values: Fast, Middle, Slow, ROff]
Memo :
0
This function
is disabled when the [FULL AUTO
ON/OFF] switch is set to “ON” or when Scene
Select mode is activated.
GAIN L, GAIN M, GAIN H
For setting the gain value of each position on the
[GAIN]
selection switch.
When the [FULL AUTO ON/OFF] switch is set to
“ON” or when Scene Select mode is activated, the
setting is fixed at “AGC”.
[Setting Values: 24dB, 21dB, 18dB, 15dB, 12dB,
9dB, 6dB, 3dB, 0dB]
(Default values GAIN L: 0dB, GAIN M: 6dB, GAIN
H: 12dB)
AE LEVEL SW
For specifying the operation of the cross-shaped
button (HI) on the right side.
0
Enable:
Enables the button.
0
Disable:
Disables the button.
[Setting Values: Enable, RDisable]
Dynamic Zoom
For setting whether to enable the dynamic zoom
function.
[Setting Values: On, ROff]
Handle Zoom Speed
This function allows you to set the zoom speed of
the zoom
lever at the handle when the [ZOOM FIX/
VAR/OFF] switch is set to “FIX”.
[Setting Values: 1 to 8 (R 5)]
Camera Function Menu
89
Menu Display and Detailed Settings