Display Screen in Camera
Mode
Display 0 screen
This screen displays the event. It is also used to
display warnings only.
.
100min
50min
282min
0
P13000K
1/100
F1. 6
0
dB
AE+6
5 . 6 f t
100mi
*1 Appears only during warnings
*2 Appears only during operation
Display 1 screen
.
100min
50min
282min
0
P13000K
1/100
F1. 6
0
dB
AE+6
12 :34 :56
Jan 12, 2016
00:00:00.00
4030 20 10 0
5 . 6 f t
G H I
100mi
* Appears only during warnings
Display 2 screen
.
100min
50min
282min
0
P13000K
1/100
F1. 6
0
dB
AE+6
12 :34 :56
Jan 12, 2016
00:00:00.00
1920x1080
50p HQ
4030 20 10 0
5 . 6 f t
P
c
C
F
KG
JH I L
M
O
Q
R
S
U
T
V
Z
X
D
E
B
N
Wb a
YA
A
OK Mark
Displayed when
OK mark has been appended.
(A P81 [Appending/Deleting OK Mark] )
B
Voltage/Battery Power
Displays the
current status of the power supply
in use.
(A P26 [Power Status Display] )
Memo :
0
Displayed in
the Display 0 and Display 1 screens
during warnings only.
C
Remaining Space on Media
Displays the
remaining recording time of the SD
cards in slot A and slot B separately.
W
: Currently selected slot. (White card)
W z : Write-protect switch of SD card is set.
W!INVALID : SD card cannot be read or
written to, or restored.
W!FORMAT : SD card requires
formatting.
W!RESTORE : SD card requires restoring.
W
!INCORRECT
:
0
When Record Set is set to other than
“AVCHD”/“SD” with a Class 4 SD card
inserted.
0
When the SD card is not supported.
0
When an SD card lower than Class 10 is
inserted while in the XHQ mode.
W!REC INH :
0
When attempting to record in 50i(HQ)/
50i(SP) to an SD card recorded in
AVCHD60i(HQ)/60i(SP) (or vice versa).
0
When an SDHC card is inserted while
[4GB File
Spanning(SDXC)] is set to “Off”.
(A P107 [ 4GB File Spanning(SDXC) ] )
Memo :
0
This item is not displayed when [Main Menu
] B
[LCD/VF] B [Display Settings] B [Media
Remain] is set to “Off”. However, warnings will
be displayed.
(A
P98 [ Media Remain ] )
0
Displayed on the Display 0 and Display 1
screens only
in the case of warnings. (When the
remaining time is shorter than 3 minutes)
The icons appear on all display screens in the
following cases.
0
When recording is performed to only one
of the slots while [Main Menu] B [System]
B [Record Set] B [Slot Mode] is set to
“Dual”.
(A P
106 [ Slot Mode ] )
0
The displayed time is an estimate.
112
Display Screen in Camera Mode
Display/Status Screen