JVC JY-HM360E - Page 54

3
Press the Set button (R).
Returns to the [White Balance] screen.
.
B Value
R Value
Manual White Balance Mode (Manual
Switching)
1
Set the [FULL AUTO ON/OFF] switch to
“OFF” to turn off the Full Auto mode.
2
Set
the [SCENE SELECT
] switch to “OFF” to
turn off the Scene Select mode.
3
Press the [WHT BAL] button to set to
Manual White Balance mode.
0
You can select the white balance with the
[WHT BAL B/A/PRESET]
selection switch.
0
Use the [WHT BAL B/A/PRESET
] selection
switch to select “PRESET” (preset mode), “A”
(memory A mode), or “B” (memory B mode).
0
The
value assigned to the switch appears on
the screen.
Memo :
0
This is fixed at “FAW” when the [FULL AUTO
ON/OFF
] switch of the camera recorder is set to
“ON”.
Preset Mode (PRESET)
0
Two different color temperature settings are
registered on this camera recorder. You can
switch between them using the [y] button.
(Default setting: “3200K”
1 “5600K”)
0
Press the [y] button to switch to a different
color temperature.
(“Preset Temp.”
1 “Alternative Temp.”)
1
Set the [WHT BAL B/A/PRESET] switch to
“PRESET
”.
2
Press the [y] button.
Setting the [Preset Temp.] or [Alternative
Temp.] Values
You can change both the color temperature
settings in the Preset mode in the menu.
1
Open the [Preset Temp.] or [Alternative
Temp.] menu.
0
Select [Main Menu] B [Camera Process] B
[White Balance] B [Preset Temp.] and
[Alternative Temp.], and press the Set button
(
R ).
0
The Color Temperature setting screen
appears.
.
Color Temperature
Detailed Selection
Screen
Color Temperature Selection Screen
2
Select the color temperature.
0
When selecting from a setting value (Color
Temperature Selection screen), use the
cross-shaped
button
(JK) to select the color
temperature.
[Setting Values: 7500K, 6500K, 5600K,
5200K, 4800K, 4200K, R3200K, 3000K,
2800K]
0
To select detailed values (Color
Temperature Detailed Selection screen)
0
Press the cross-shaped button (I) to
display the Color Temperature Detailed
Selection screen.
0
Use the cross-shaped button (JK) to
select a color temperature.
[Setting Values: 2300K to 15000K (in
100K increments)]
Memo :
0
Use the cross-shaped button (I) to switch
between the Color Temperature Selection
screen and the Color Temperature Detailed
Selection screen.
0
If [White Balance] has been assigned to the user
button, pressing the assigned user button will
display the Color Temperature Selection
screen.
(A P34 [Assignment of Functions to User
Buttons] )
54
Adjusting the White Balance
Shooting