9
Stretch Level
Stretch amount increases when a larger value is
specified.
[Setting Values: 1 to 5 (R 3)]
Memo :
0
This item is displayed only when [
Black Toe] is
set to “Stretch”. Otherwise, this item appears as
“---” and cannot be selected.
9
Compress Level
Compression amount increases when a larger
value is specified.
[Setting Values: 1 to 5 (R 3)]
Memo :
0
This item is displayed only when [
Black Toe] is
set to “Compress”. Otherwise, this item appears
as “---” and cannot be selected.
White Clip
For setting the point to apply white clip for input
video signals with a high luminance level.
0
108%:
Applies white clip at the point where the
luminance level is 108 %.
0
103%:
Applies white clip at the point where the
luminance level is 103 %.
0
100%:
Applies white clip at the point where the
luminance level
is 100 %. Set to this value when
the system in use limits Y output signals within
100 %.
[Setting Values: R108%, 103%, 100%]
Gamma
For adjusting
the gamma curve that determines the
gradation expression.
0
Cinema:
Sets to
a gamma curve with similar gradation to
the screen characteristics of movies.
0
Standard:
Sets to a standard gamma curve.
[Setting Values: Cinema, RStandard]
9
Level
This item can be specified separately when
[Gamma
]
is set to “Standard” or “Cinema”.
0
Increase the number:
Enhances the gradation of black. However, the
gradation of bright areas deteriorates.
0
Decrease the number:
Enhances the gradation of bright areas.
However, the gradation of black deteriorates.
[Setting Values: -5 to +5 (R 0)]
White Balance...
Menu for adjusting white balance.
(A P94 [White Balance Item] )
*
For details, refer to “[Adjusting the White
Balance] (A P
53
)”.
Color Matrix
For setting the color matrix.
0
Cinema Subdued:
Sets to a subdued color matrix that is similar to
the screen characteristics of movies.
0
Cinema Vivid:
Sets to a vivid color matrix that is similar to the
screen characteristics of movies.
0
Standard:
Sets to a standard color matrix.
[Setting Values: Cinema Subdued, Cinema Vivid,
RStandard]
9
Adjust
This item is used to adjust [Color Matrix
] to a color
according to the user’s preference.
0
This item is used to adjust [
Color Matrix] to a
color according to the user’s preference.
0
The saturation, hue and brightness of the
primary and complementary colors (6 colors in
total) can be set individually.
0
The adjusted values of “Standard
”, “Cinema
Vivid”, and “Cinema Subdued” in [Color Matrix]
can be stored individually.
(A P
120 [Adjusting Color Matrix] )
[Setting
range for Lightness/Saturation: -10 to +10]
(roughly ± 10 %)
[Setting range for Hue: -5 to +5] (roughly ± 5°)
Color Gain
For adjusting the video signal color level.
Increasing the value deepens the color.
[Setting Values: -50 to +15, Off (R0)]
Memo :
0
Images are displayed in black-and-white when
this is set to “Off”.
Reset Process
Restores all items in the [Camera Process] menu
to their default settings.
Camera Process Menu
93
Menu Display and Detailed Settings
To Next Page
Loading...
