JYE Tech DSO112A - Page 25

DN112-06v02
JYE Tech - 25 - www.jyetech.com
Set Parameters
Function: Set parameters to DSO112A. Newly set parameters
take effect at next round capture.
Format:
Return:
Special Command
Function: Turn measurements on/off, restore factory default,
perform VPos alignment., and save/recall presets.
Format:
CtrlByte:
Offset Field Name Size Value
-1 Sync character 1 0xFE
0 Frame ID 1 0xC0
1 Frame Size 2 34
3 Sub command 1 0x22
4 VSen 1
5 Cpl 1
6 VPos 2
8 Reserved 4
12 Timebase 1
13 Reserved 3
16 TrigMode 1
17 TrigSlope 1
18 TrigLvl 2
20 TrigPos 1
21 TrigSrc 1
22 Reserved 1
23 Measurements 1
24 Record Length 2
26 Reserved 4
30 HPos 2
32 Reserved 2
Offset Field Name Size Value
-1 Sync character 1 0xFE
0 Frame ID 1 0xC0
1 Frame Size 2 6
3 Sub Command 1 0x24
4 CtrlByte 1
5 Measurement 1
6 Preset 1