40 k1evo706en-2011-07 Kaba Terminal 9420 MID
Repairs & maintenance User manual
6.4.6 Resetting the terminal
If an existing terminal has to be reconfigured, the existing configuration must first
be deleted.
1. Start the Control Panel and remove the Kaba evolo Terminal program.
2. Start the terminal in service mode.
3. Start the FTP browser and connect to the terminal.
- Enter the IP address of the terminal
- User name: root
- Password: Bedanet
Login screen in FTP browser (e.g. Filezilla)
4. Delete the registration file (folder data / registration)
Registration file to be deleted: "registration"
5. Access the terminal using the web browser (see section 6.4.3, page 37).
6. Perform a warm start from the Restart menu.
To Next Page
Loading...
