20 k1evo706en-2011-07 Kaba Terminal 9420 MID
Fitting the Kaba terminal User manual
Mains terminal
The mains voltage has 2-pole fuse protection (4), subminiature fuse (radial)
T 1.0 A / 250 V.
Only replace a fuse with a fuse of the same type.
4.4.4 Fastening the terminal housing to the docking station
For safety reasons (safety of device and persons), the electronic components and
connections in the docking station must not be accessible.
In the case of devices with an optional motherboard in the docking station, the
terminal housing must therefore be installed immediately after installing the
docking station.
The terminal housing can be installed later in the case of devices that do not have a
motherboard in the docking station (supplied via PoE).
To Next Page
Loading...
