User Manual B-Net 93 60 Product description
01/2006 © Kaba Benzing GmbH 13
3.3 Conformity
This device complies with the standards
EN 55022
EN 61000-6-1
EN 61000-6-2
EN 300330
according to the regulations of the EU guidelines
73/23/EWG
Low voltage directive
89/336/EWG
EMC standard
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTICE!
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
3.4 Labeling
The identification plate is located on the bottom side of the device.
Fig. 2: Position of identification plate
On the identification plate are:
• Device name
• Product number
• Serial number
• Power data
• CE identification
• WEEE specification according to DIN EN 50419, please refer to chapter
11
To Next Page
Loading...
Need help?
General
