Kaba B-Net 93 60 - Set-up; Set-up process

Set-up User Manual B-Net 93 60
42 © Kaba Benzing GmbH 01/2006
6 Set-up
6.1 Set-up process
Set-up takes place as follows:
• Link service PC with the terminal.
• Start device in service mode.
Refer to chapter
6.3.4
• Call up BECO500 service module via http browser.
Refer to chapter
7.2
• Log in with user name: localuser, Password: Bedanet
• Set network parameter
Hardware Settings / Ethernet Communication Parameter
Refer to chapter
7.3.7.1
• Enter the group and device address (GID/DID) of BECO500
Hardware Settings / Hostline Parameters
Please refer to chapter
7.3.7.4
• Restart device in application mode
System Monitoring and Maintenance / Restart or switch device off/on.
Refer to chapter
7.3.6.10
• Loading of specific parameters and master records from host
Please refer to the Manual of the used application.
Remark
The BECO500 Service Module is described in detail in chapter
7.