Kaba B-Net 93 60 - Host Connection Via Partyline; Host Connection Via Modem

Set-up User Manual B-Net 93 60
44 © Kaba Benzing GmbH 01/2006
6.2.3 Host connection via partyline
Hardware requirements:
• The terminal must be equipped with option BEX302 (interface RS485).
• The host partyline must be connected at the BEX101, please refer to chapter
5.6.6
Settings in the service module:
• Hardware Settings/Host Line, refer to chapter
7.3.7.4.
• Host Line: Enabled
• Interface: COM1
• Group ID: (GID)
• Device ID: (DID)
• Hardware settings/serial line communication parameter,
please refer to chapter
7.3.7.2.
• COM 1: Enabled
• Bits per second: 9600
• Data bits: 7
• Parity EVEN
• Stop bits: 1
6.2.4 Host connection via modem
Hardware requirements:
• The terminal must be equipped with an optional internal analog modem or
ISDN modem.
Settings in the service module:
• Hardware Settings/Host Line, refer to chapter
7.3.7.4.
• Host Line: Enabled
• Interface: COM1
• Group ID: (GID)
• Device ID: (DID)
• Hardware settings/serial line communication parameter,
please refer to chapter
7.3.7.2.
• COM 1: Enabled
• Bits per second: 9600
• Data bits: 7
• Parity EVEN
• Stop bits: 1
• Initialize modem; refer to chapter
7.3.7.8