User Manual B-Net 93 60 Mounting and installation
01/2006 © Kaba Benzing GmbH 37
5.6.11 Input 24 V
The supply voltage for the terminal is connected to this clamp.
The supply of the terminal can take place via an integrated SV9001 (optional) or
via an external power supply e.g., SV900 or SV905.
Rated voltage: 24 V AC/DC
Voltage range: 12 -27 V AC
16 -32 V DC
Frequency: 50 -60 Hz
Power consumption: 25 W max.
NOTICE!
Please make sure that the input voltage range during maximum load is observed.
Important for devices with host connection via RS485!
If several terminals are supplied with the same DC voltage, it must be considered
that the polarity at the input terminals is consistent (preferably Plus at bottom).
To Next Page
Loading...
