User Manual B-Net 93 60 Safety regulations
01/2006 © Kaba Benzing GmbH 9
2.5 ESD (Electro Static Discharge) protective measures
CAUTION
Danger for electronic components due to electrostatic discharge.
Improper handling of printed circuit boards or components can cause damages that
lead to complete failures or sporadic errors.
During installation and repair of the device, the ESD protective measures must be
considered.
Please consider the following guidelines before the installation or maintenance of
the device:
• If you deal with electronic components, always carry a wristband for the
protection against electrostatic discharge. Connect one part of the wristband
with a discharge socket or an unvarnished grounded metal component.
• Only touch the printed circuit boards at the edges. Do not touch the printed
circuit board itself or the connector.
• Place all dismantled components on an anti-static surface or in a static-proof
container.
• Avoid contact between printed circuit boards and your clothing. The
wristband only protects the printed circuit boards against electrostatic
discharge from the body, but there is still a risk of damage through
electrostatic discharge from your clothing.
• Only transport and dispatch dismantled modules in protective bags.
To Next Page
Loading...
