2 Technical Specifications
2.1 Nameplate
The model designation and important technical information are given on the machine's nameplate.
The nameplate is located on the outside of the machine:
■ above the cooler, or
■ on the rear of the machine.
➤ Enter here the nameplate data as a reference:
Feature Value
Rotary screw compressor
Material no.
Serial no.
Year of manufacture
Rated power
Rated motor speed
Maximum working pressure
Ambient temperature
Tab. 3 Nameplate
2.2 Options
The table contains a list of possible options. The options for this machine are shown near the
nameplate.
➤ Enter options here as a reference:
Option Option code Available?
MODULATINGcontrol C1
SIGMA CONTROL 2
(Prepared for connection to control centre)
C3 —
SIGMA CONTROL 2
(Connection to control technology not provided)
C48 ✓
Bolt-down machine mounts H1
Air-cooling K1 ✓
Transformer power supply for refrigeration dryer T2 —
Prepared for heat recovery W1
Provided: ✓
Not available: —
Tab. 4 Options
2 Technical Specifications
2.1 Nameplate
4
Operating Manual Rotary screw compressor
SK 901848 21 E
To Next Page
Loading...
Need help?
General
