KAESER SK Series User Manual

Fig. 13 Position of the door interlock switch
1 Door interlock switch
2 Access panel
1. Open the access panel 2 after the machine has been switched on.
the machine shuts down automatically. The controller displays an alarm message.
2. Close the panel and acknowledge the alarm.
The machine does not shut down?
➤ Have the interlock switch checked by an authorised KAESER SERVICE Technician.
7.10 Setting the display language
The controller can display text messages in several languages.
You can set the language for texts on the display. This setting will be retained even when the ma‐
chine is switched off.
1. In operating mode, switch to the main menu with the «Return» key.
2. Press the «UP» or «DOWN» keys until the current language is shown as active line (inverse):
6 . 1 b a r 8 0 . 0 ° C
–––––––– de_DE Deutsch ––––––––
Current language (active line)
▶1 xxxxxxxxxx
Submenu
▶2 xxxxxxxxxx
Submenu
▶3 xxxxxxxxxx
Submenu
▶4 xxxxxxxxxx
Submenu
▶5 xxxxxxxxxx
Submenu
▶6 xxxxxxxxxx
Submenu
3. Use the «Return» key to switch to setting mode.
The language display flashes.
4. Move to the required language with «UP »or «DOWN».
5. Confirm the setting with the «Enter» key.
Result The display texts are now in the selected language.
Further information Detailed information can be found in the SIGMA CONTROL 2 operating manual.
7 Initial Start-up
7.10 Setting the display language
901848 21 E
Operating Manual Rotary screw compressor
SK
47

KAESER SK Series Specifications

General

Type	Rotary Screw Compressor
Cooling	Air
Drive	Direct
Control System	SIGMA CONTROL 2
Model	SK Series
Noise Level	66 - 72 dB(A)