Fig. 33 Transporting with a forklift truck
1. Take note of the centre of gravity.
2. Drive the forks completely under the machine or palette and lift carefully.
12.4.3 Transport with a hoist
Only suitable and approved load-carrying and attachment devices ensure proper transport of the
machine with a hoist (e.g., crane). Suitable crossbeams ensure sufficient distance of the attach‐
ment resources from the machine housing to prevent damage.
The machine is not equipped with fastening points.
Examples of unsuitable fastening points:
■ Pipe sockets
■ Flanges
■ Attached components such as centrifugal separators, condensate drains or filters
■ Rain protection covers
➤ Consult KAESER if you require suitable load-carrying and attachment devices or have
questions regarding the correct use.
Precondition Load-carrying and attachment devices meet the local safety regulations.
The hoist, load-carrying and attachment devices or the lifted machine do not endanger personnel.
12 Decommissioning, Storage and Transport
12.4 Transport
86
Operating Manual Rotary screw compressor
SK 901848 21 E
To Next Page
Loading...
Need help?
General
