KaVo DSE Expert - Mounting Motors and Instruments

Instructions for use DSE Expert
4 First use | 4.1 Fitting and connecting
Requirement
The air to be used for the dental simulation unit must be dry, oil-free, non-contamin-
ated, and free of pollution. Use a compressor with a dry air system if required.
▶ Connect the handpiece hoses ① and suction hoses ② to the DSE according to
configuration.
4.1.2 Mount motor and instruments
▶ Install motors and instruments as outlined in the instructions.
See also:
2 Instructions for Use of instrument or motor.
27 / 74