What to do if there is no voltage supply in KaVo DSE Expert Science Education products?
If there's no voltage supply to your KaVo Science Education products, first, ensure the main switch is turned on. If the problem persists, unplug the unit and replace the microfuse T6.3H located next to the master switch, as the main fuse may have blown.
What to do if patient simulator does not move in KaVo DSE Expert?
If the patient simulator in your KaVo Science Education products does not move, the safety shut-off may be activated. Check the safety shut-off and address the reason for the shut-off. Then, start the program for learning the end-positions.
Why suction power of saliva ejector is insufficient in KaVo DSE Expert?
If the suction power of the saliva ejector is insufficient in your KaVo Science Education products, first check if the spray mist extractor is closed; if not, close it. Also, ensure the wastewater tank is correctly inserted.
Why there is no spray in the handpieces of KaVo DSE Expert Science Education products?
If there is no spray in the handpieces of your KaVo Science Education products, first preselect spray and check the setting on butterfly valves of the dentist element. Also, ensure the pressure tank is correctly inserted until you hear the holder magnets click.
What to do if the three-function / multifunctional handpiece is not working properly in KaVo Science Education products?
If the three-function or multifunctional handpiece of your KaVo Science Education products is not working properly, check whether the compressed air shut-off valve and the water shut-off valve are closed. If either valve is closed, open it.
Why there is no cold light on the handpieces of KaVo DSE Expert?
If there is no cold light on the handpieces of your KaVo Science Education products, first preselect cold light. If that doesn't solve the issue, the high-pressure lamp or Multi LED on the handpiece may be defective and need replacement.
Why suction power decreases in KaVo Science Education products?
If the suction power decreases in your KaVo Science Education products, it may be because the wastewater tank is full. Drain the wastewater tank and refill the pressure tank.
What to do if display shows nothing on KaVo DSE Expert?
If the display of your KaVo Science Education products shows nothing, turn the device off and on. Call the service technician to look into the problem if it continues to exist.
What to do if operating device has no function on KaVo DSE Expert?
If the operating device of your KaVo Science Education products has no function, turn the device off and on. Call the service technician to look into the problem if it continues to exist.
General| Brand | KaVo |
|---|---|
| Model | DSE Expert |
| Category | Science Education products |
| Language | English |
Guidance on manual usage, abbreviations, and safety symbols.
Customer service contact details and warranty terms.
Instructions for safe transport, storage, and packaging regulations.
Explanation of warning symbols, hazard levels, and instruction format.
General safety precautions including electrical and explosion hazards.
Specific safety warnings for operating the DSE Expert unit.
Procedures for the environmentally sound disposal of electronic equipment.
Defines intended use, operational guidelines, and included components.
Diagrams and explanations of the main unit and its elements.
Details the components and connections of the dentist and assistant units.
Details on the control panel, foot controls, and their functions.
Illustrations and identification of triple-function handpiece components.
Instructions for operating instruments using Foot Controls A and C.
Information on optional LED lights and unit rating plate symbols.
Detailed technical data including dimensions, voltage, and performance.
Steps to connect power, air, water, and instruments to the DSE Expert.
Procedure for installing motors and connecting instruments.
Guidance on connecting instruments and installing LED simulation lights.
Steps for positioning the simulator, its head, and converting for user preference.
Steps for starting, moving, parking, and safely shutting down the unit.
Instructions for operating instruments using Foot Controls A and C.
Details on the control panel, preselection buttons, and their configuration.
Instructions for using suction, turbine, and INTRA LUX motors.
Instructions for using Satelec LED, Poly One, and PIEZOsoft/PiezoLED scalers.
Instructions for using the K5 plus handpiece, including safety precautions.
How to use triple-function handpieces, including air, water, and spray controls.
Using the camera and navigating the unit's menu system.
Configuring user count and LUX afterglow period.
Setting ENDO holder, time of day, and date in the user menu.
Setting display modes, date/time formats, and menu language.
Adjusting LCD contrast and viewing firmware version.
Functionality of the standby menu and handling of service/error messages.
Instructions for using the optional ENDO menu features.
Procedure for selecting a user profile from the available list.
Displaying and adjusting handpiece-specific settings in the menu.
Maintenance tasks including tank cleaning and germ reduction.
Instructions for filling the pressurised water system and its components.
Procedure for permanent and intensive germ reduction using Oxygenal 6.
Instructions for cleaning the exterior and specific components of the unit.
Requirements and procedures for periodic safety inspections.
Diagnosing and resolving common malfunctions of the unit.
List of optional accessories with descriptions and material numbers.
To Next Page