KaVo DSE Expert - Instrument Usage: LED, Poly One, Scalers

Instructions for use DSE Expert
5 Operation | 5.5 Instruments
40 / 74
5.5.4 Using Satelec mini LED
See also:
2 Satelec Mini LED Instructions for Use
▶ When the treatment is completed, switch off the main switch of the unit.
5.5.5 Using KaVo Poly One
See also:
2 Instructions for use KaVo Poly One
5.5.6 Using the PIEZOsoft/PiezoLED ultrasound scaler
Note
The setting of the mode is only available in combination with a PiezoLED Ultrasonic
Scaler. The PiezoLED menu and all PiezoLED functions are only available if a
PiezoLED license is existent.
Setting the PIEZOsoft
The status of the handpiece is shown on the display when the PIEZOsoft is being
taken out:
▪ Intensity
▶ Settings can be changed using the corresponding keys on the control panel or on
foot control A. The intensity can be set exclusively with the foot control A. The
spray can be set with the foot control or the control buttons.
ð The current settings are saved and activated the next time the handpiece is taken
out.
S1
S2 S3 S4
Setting the PiezoLED
The status of the handpiece is shown on the display when the PiezoLED is being
taken out.
▪ Intensity
▪ Mode
▪ Light intensity