24 SCAN EXAM
3. Using the system
3.9 Retrieve last image
If the last image read is not transferred to
the PC because of a network, communication,
PC or software failure, the last image read
can be retrieved.
IMPORTANT NOTICE
The LAST read image can only be retrieved
if the unit is left on. If the unit is switched
off the image will be lost.
To retrieve the last processed image:
1. Correct the problem that caused the com-
munication failure. When the connection
between the unit and the PC is re-estab-
lished the last processed image is auto-
matically transferred to the PC.
2. PC: If the image is not automatically
transferred to the PC, select the Device
Settings > Image page from the imag-
ing application software your are using.
3. PC: Click Retrieve now button to retrieve
the last processed image from the unit
memory.
NOTICE:
You can select different parameters (for
example resolution) for the image to be
retrieved.
4. PC: Click Save to close the Setup window.
The last processed image is transferred to
the PC.
To Next Page
Loading...
Need help?
General
