User manual 215948 31
4. Handling and care of imaging plates
4.5 Replacement
Replace an IP if:
• the image shows marks, spots or dots,
which still appear on images even after
the IP has been properly cleaned.
• the IP is mechanically damaged
(scratched) or badly bent.
4.6 Disposal
IPs must be disposed of in accordance with
all local, national and international regula-
tions regarding the disposal of non-environ-
mentally friendly or hazardous materials.
Phosphor substance, under the top coat, on
the sensitive side of IPs must not be swal-
lowed.
To Next Page
Loading...
