SCAN EXAM 25
3. Using the system
3.10 Shutting down the unit
Press and hold down the power on / off
key.
The UV disinfection cycle, when active
(refer to section Installation and set up
/ hygiene), will be automatically carried
out before the unit switches itself off.
If you wish to switch the unit off before
the UV disinfection cycle is complete,
press and hold down the power on / off
key again (4 seconds) and the unit will
shutdown.
If you wish to return to the normal opera-
tion mode, press and hold down (4 sec-
onds) the start key.
NOTICE:
If there is an untransferred image in the
unit’s memory the unit cannot be shut
down. The image must be transferred
fi rst. Refer to section 3.9 Retrieve last
image.
To Next Page
Loading...
Need help?
General
