38 SCAN EXAM
7. Warnings and precautions
• Medical electrical equipment needs special precautions regarding
EMC and needs to be installed according to EMC information.
• Do not position the PC where it could be splashed with liquids.
• Clean the PC in accordance with the manufacturer’s instructions.
• Image is not transferred from unit to PC imaging application
software in case of connection lost during image processing. Image
is stored in unit memory until it has been transferred to PC. Unit
cannot be turned off in that case. When network is operational
again, image is automatically transferred to imaging application
software. Do not disconnect the unit’s PSU adapter before the
network is operational and image has been transferred to imaging
application software.
• Due to Occlusal 4C projection imaging geometry and imaging plate
positioning, accurate distance and angle measurements cannot be
taken from occlusal projection images.
To Next Page
Loading...
Need help?
General
