GB - 26
KEB COMBICONTROL
rc.04 data valid Address 0404h
The realtime clock is running for approx. 30 days after switching off the supply. After this it
must be adjusted again. If this parameter has the value „false“, the date and/or time is not
correct. The clock must be adjusted.
3.3.3 Userdenitionparameter
ud.01 Password Address 0801h
Enter the password for the appropriate user level and le access level. Following values
are possible:
100 CP mode write protection File level 0
200 CP mode read/write File level 1
330 CP mode service File level 2
440 Application mode File level 3
xxx Supervisor File level 7
Ud.02 Features Address 0802h
Display of the actual disconnected special functions (e.g. SoftMotion)
ud.03 IO module Address 0803h
This parameter displays the installed I/O module.
ud.04 eldbusmodule Address 0804h
This parameter displays the installed Fieldbus module.
ud.09 Indirect set pointer Address 0809h
Display and adjustment of the set indicator for indirect parameter access.
3.3.4 Flashlesystem
Fl. 00 max. bytes Address 0900h
Displays the max. bytes in the ash. This is the sum of used, deleted and free bytes.
Fl. 01 max.les Address 0901h
Displays the max. les in the ash.
Fl. 02 used bytes Address 0902h
Displays the actual used bytes in the ash.
Fl. 03 usedles Address 0903h
Displays the actual used les in the ash.
To Next Page
Loading...
Need help?
General
