GB - 8
KEB COMBICONTROL
2. Functional Description
The C6 compact is mounted on a 35 mm mounting rail. The earthing occurs with a plug-in
contact or terminal connection X2.19/20.
2.1 Real-time clock
The integrated realtime clock is maintenance-free (no battery) and operates without power
supply for approx.30 days. After this it must be adjusted again. A read out parameter indicates
the validity of the date and time. The control shall remain switched on min. 30 minutes for
complete loading. Leap years are recognized automatically up to the year 2099. Date and
time can be read and set via COMBIVIS or the control program (library „SysTime“).
2.2 HSP5/485-interfaces to the inverter/servo axes
Up to four KEB COMBIVERT F5 can be connected via the terminals X1A to X1D. The
connection occurs via reliability RS485 cables, which can be up to 100 m long. A shielded
standard cable with RJ-45 connector is used on the control side and appropriate operator on
the frequency inverter/servo. The type of communication is determined by the IEC program,
see library description and demo program HSP5_Master. This means that no connection to
the axis is possible without IEC control program.
To Next Page
Loading...
Need help?
General
