KEB COMBIVERT F5 BASIC - Page 93

6
17
24.06.02
KEB COMBIVERT F5-G / B
Name: Basis
6
Functional Description
© KEB Antriebstechnik, 2002
All rights reserved
Chapter Section PageDate
Operating and Appliance Data
Adr.
min max
default
0204h
ru. 4 Encoder 1 frequency
0,0125
Hz
-
400-400
!ud.2!
!ud.2!
Adr.
min max
default
0205h
ru. 5 Encoder 2 frequency
0,0125
Hz
-
400-400
!ud.2!
!ud.2!
Adr.
min max
default
0206h
ru. 6 Calculated actual frequency
0,0125
Hz
-
400-400
!ud.2!
!ud.2!
Adr.
min max
default
0209h
ru. 9 Encoder 1 speed
0,125
rpm
-
4000-4000
!ud.2!
!ud.2!
Adr.
min max
default
020Ah
ru.10 Encoder 2 speed
0,125
rpm
-
4000-4000
!ud.2!
!ud.2!
The displayed value corresponds to the actual frequency measured at the encoder input 1. The value „0“ is indicated,
even if no encoder interface is available.
The displayed value corresponds to the actual frequency measured at the encoder input 2. The value „0“ is indicated,
even if no encoder interface is available.
The displayed speed corresponds to the actual speed measured at the encoder input 1. The value „0“ is indicated, even
if no encoder interface is available.
The displayed speed corresponds to the actual speed measured at the encoder input 2. The value „0“ is indicated, even
if no encoder interface is available.
The displayed value corresponds to the actual frequency calculated from the inverter.
Adr.
min max
default
0207h
ru. 7 Actual value display
0,0125
Hz -
400-400
The displayed value corresponds to the rotary field frequency given out at the inverter output (cS.0 Bit 0...2 = 0 or 1). At
cS.0 Bit 0...2 = 2 the frequency of the channel selected in cS.1 is displayed (ru.4/5/6).
!ud.2!
!ud.2!