KEB COMBIVERT F5 MULTI

Functional Description
1. Introduction
2. Summary
3. Hardware
4. Operation
5. Parameter
6. Functions
7. Start-up
8. Special Operation
9. Error Assistance
10. Project Planning
11. Networks
12. Annex
6.1 Operating and Applicance
Date
6.2 Analog In- and Outputs
6.3 Digital In- and Outputs
6.4 Set Value and Ramp
Adjustment
6.5 Voltage-/Frequency
Characteristic (U/f)
Adjustment
6.6 Motor Data Adjustment
6.7 Protective Functions
6.8 Parameter Sets
6.9 Special Functions
6.10 Encoder Interface
6.11 SMM, Posi, Synchron, CTM
6.12 Technology Control
6.13 CP-Parameter Definition
6
51
KEB COMBIVERT F5
Name: Basis
04.05.04
Section PageDate
© KEB Antriebstechnik, 2002
All rights reserved
Chapter
6.5.1 Control type and Max.
Frequency Mode ..................... 3
6.5.2 Rated frequency and Boost .... 4
6.5.3 Additional Rated Point ............ 4
6.5.4 Delta Boost............................. 4
6.5.5 Voltage Stabilization ............... 5
6.5.6 Maximal Voltage Mode ............ 6
6.5.7 Switching Frequency............... 6
6.5.8 Used Parameters .................... 7